MARUTI SUZUKI CELERIO Bedienungshandbuch Seite 191

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 209
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 190
180
MH0-74E
Full Wheel Cover (if equipped)
EXAMPLE
MH0-07-014
MH0-07-001
EXAMPLE
NOTICE
Your vehicle should not be started by
pushing or towing. This starting
method could result in permanent
damage to the catalytic converter. Use
jump leads to start a vehicle with a
weak or flat battery.
When Jump Starting Your Vehicle,
Use the Following Procedure:
1) Use only a 12-volt battery to jump start
your vehicle. Position the good 12-volt
battery close to your vehicle so that the
jump leads will reach both batteries.
When using a battery installed on
another vehicle, DO NOT LET THE
VEHICLES TOUCH. Set the parking
brakes fully on both vehicles.
2) Turn off all vehicle accessories, except
those necessary for safety reasons (for
example, headlights or hazard lights).
EMERGENCY SERVICE
10-4
NOTICE
Jump Starting Instructions
WARNING
Insert a piece of cloth between the spokes of
the wheel cover and try to pull the cover
outward (as shown in figure). Take out the
detached wheel cover from the wheel rim. For
installation first match the slot at the wheel
cover with the air filling nozzle of the wheel.
Apply equal pressure at the circumference of
the wheel cover to fix it in the wheel rim.
When installing the cover, make sure that it is
positioned so that it does not cover or foul the
air valve.
After Changing Wheels
Stow the tyre changing tools (jack, jack
handle and lug wrench) in place. Also, stow
the flat tyre in the spare tyre stowed position.
Refer to “Tyre Changing Tool” in this section.
Repair or replace the flat tyre immedi-
ately. If the flat tyre is placed in the
spare tyre stowed position for long
time, it can cause vehicle shakiness,
noise, or scratches.
Never attempt to jump start your
vehicle if the battery appears to be
frozen. Batteries in this condition
may explode or rupture if jump
starting is attempted.
When making jump lead connec-
tions, be certain that your hands and
the jump leads remain clear from
pulleys, belts, or fans.
Batteries produce flammable hydro-
gen gas. Keep flames and sparks
away from the battery or an explo-
sion may occur. Never smoke when
working in the vicinity of the battery.
If the booster battery you use for
jump starting is installed in another
vehicle, make sure the two vehicles
are not touching each other.
If your battery discharges repeatedly,
WARNING
for no apparent reason, have your
vehicle inspected by an authorized
MARUTI SUZUKI dealer.
To avoid harm to yourself or damage
to your vehicle or battery, follow the
jump starting instructions below
precisely and in order.
If you are in doubt, call for qualified
road service.
Seitenansicht 190
1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 208 209

Kommentare zu diesen Handbüchern

Keine Kommentare