157
MH0-74E
(1)
Spark Plugs
EXAMPLE
76MH0A109
EXAMPLE
68KH072
For nickel spark plugs (traditional type):
You should inspect spark plugs periodically
for carbon deposits. When carbon
accumulates on a spark plug, a strong
spark may not be produced. Remove
carbon deposits with a wire or pin and
adjust the spark plug gap.
To access the spark plugs:
1) Unclamp and remove the bolt, then
remove the air cleaner case.
2) If necessary, disconnect the coupler (1)
while pushing the release lever.
3) Remove the ignitor bolts.
4) Pull the spark plug boots out.
NOTE:
When installation, make sure the wires,
couplers, sealing rubber of top cover and
washers, are correctly returned in place.
EXAMPLE
78K179
NOTICE
When pulling the ignition coils out,
do not pull on the cable. Pulling on
the cable can damage it.
When servicing the iridium/platinum
spark plugs (slender center elect-
rode type plugs), do not touch the
center electrode, as it is easy to
damage.
60G160S
Correct
Wrong
Loosen
Tighten
INSPECTION AND MAINTENANCE
9-12
Kommentare zu diesen Handbüchern